Aids for the Removal of floor coverings
- Products
- Seminars
- Brands & Subjects
- About us
- Contact
Art.-No.
111 160 000
Cutting Tool with detachable and adjustable parallel guide. Cuts carpet, vinyl, linoleum or rubber into strips before removing with a stripper or the ELEPHANT.
Art.-No.
161 207 000
Special scraper with strong and hardened blade holder ergonomically shaped and padded handle. Handle length 152 cm (6“) Weight 4.3 kg (9.5lbs) Blade width 130 mm (5“)
Art.-No.
161 206 000
Special scraper with heat-treated head for maximum durability for the removal of all types of thick film coatings such as epoxy, VTC and adhesives. Handle length 152 cm (6“) Weight 3.6 kg (8lbs) Blade width 204 mm (8“)
Art.-No.
161 204 400
Allows you to maintain a straight back whilst removing floorboards,
parquet, tiles or ceiling panels. ■ The angle of the head of the heavy-duty pry bar allows you to maintain a vertical posture while removing flooring, sub-floor,
panels, rather than spending the entire time working in a bent
over position. ■ The nail puller at the back of the head allows you to remove nails
without having to bend over and risk back injury or slipping and
falling. ■ The wheels allow you to roll the bar on the floor rather than having
to lift it every time. ■ The GUTSTER Demolition Bar optimizes the fulcrum point used
for prying and achieves maximum leverage. ■ The head has spear shaped points to reach under floor coverings.
Highly suitable for gutting spaces or for breaking down drywall
structures! Length 1,5 m (5') with wheels, weight 4,8 kg (10,58 lbs)
Art.-No.
161 204 300
Allows you to maintain a straight back whilst removing floorboards,
parquet, tiles or ceiling panels. ■ The angle of the head of the heavy-duty pry bar allows you to
maintain a vertical posture while removing flooring, sub-floor,
panels, rather than spending the entire time working in a bent
over position. ■ The nail puller at the back of the head allows you to remove nails
without having to bend over and risk back injury or slipping and
falling. ■ The wheels allow you to roll the bar on the floor rather than having
to lift it every time. ■ The GUTSTER Demolition Bar optimizes the fulcrum point used
for prying and achieves maximum leverage. ■ The head has spear shaped points to reach under floor coverings.
Highly suitable for gutting spaces or for breaking down drywall
structures!Length 1,2 m (4') without wheels, weight 3,9 kg (8.59 lbs)
Art.-No.
161 201 000
Removable two-sided blade is easily replaceable through securing wing nuts. Handle length 135 cm Weight 2.7 kg Blade width 280 mm (11“)
Art.-No.
161 202 000
Floor Scraper With telescopic handle,205 mm (8") width of blade
Art.-No.
161 204 000
Multiple use tough tool with 18 cm (7“) wide blade rolled forged & heat treated head. Total length 166 cm (65 1/3“) Weight 3 kg (6.61 lbs) Blade width 18 cm (7“)
Art.-No.
139 190 000
Blade width 125 mm (5") Handle length 55 cm (21¹¹/₁₆")
Art.-No.
139 191 000
Heavy Duty Hand ScraperBlade width 125 mm (5“) Handle length 52 cm (20 ½“)
Art.-No.
139 192 000
Length:
28 cm
Universal Scraper - cranked head protects hands
wide hammer head
extra strong blade for scraping
hard materials (included)
ergonomic soft grip length 28 cm (11 1/16'')
Art.-No.
139 192 010
Spare blades, rigid 1,2 mm for Universal Scraper
Art.-No.
139 108 000
Janser Hand Scraper with Blade width 100 mm (4“)
Handle length 40 cm (15 ¾“)
Art.-No.
111 107 000
Pulling Claw Silver- Heavy Duty Distinguished by an attractive, ergonomic design and made from an almost indestructible aluminium alloy, this pulling claw is an indispensible and unexpectedly powerful aid in the removal of glued down floor-coverings Clamping action gives a vicelike grip on material to be removed. This device protects the fingertips and nails.
Art.-No.
139 195 000
Scrape-Rite TM Scraper - with die-cast aluminium head and reinforced shaft
spring-loaded blade clamp
for snap-off blades or scraper blades
inclusive protective blade guard Length 30 cm (11 13/16'')
comes incl. 3 pcs of snap-off blades
Art.-No.
139 150 000
Handle Length:
50 cm
Allway Scraper 100 mm (4") blade width,with replaceable blade,comes in 2 different lengths: Long handle 50 cm (19 ¾")
Art.-No.
139 192 020
Spare Blades flexible 0,5 mm for Universal Scraper
Art.-No.
161 210 000
Trowels/ Brooms Special Trowel width 80 mm (3 1/8")
Art.-No.
161 202 001
Floor Scraper / Floor Scraper MEGA-200 Spare blades , 205 mm (8") width 10 pcs.
Art.-No.
139 106 000
Handle Length:
50 cm
Janser Hand Scraper 100 mm (4") blade width,with 3 case hardened screws,comes in 2 handle lengths Long handle - 50 cm (19¾")
Art.-No.
139 194 000
Multi-Scraper - with striking head for hammer impact.
Eyelet for nail an brad removal.
Curved edge for round surfaces
& cleaning paint rollers.