Art.-No.
240 996 400
When it comes to internal finishing work, there is no better helper than the KSS 40 18M bl, whatever the task in hand: be it for floors, walls, doors, furniture, ceilings or roof battens – to make cross or rip
cuts, rail-guided cuts, miter or compound miter cuts at angles up to
45°, or even plunge cuts.
Art.-No.
240 996 200
A small machine for large jobs. One system, five saws, one box. The KSS 300 works as a crosscut
saw,plunge cut saw, shadow gap saw, handsaw or circular handsaw
for guided cuts with Flexi-Guide. Precise cuts up to 1.4 m (3’3 ¾”) are possible in combination with the flexiguide
(see special accessories).
Art.-No.
240 996 100
Flexi guide FX 140 for KSS 300 crosscutting system Accessories Flexi guide FX 140 (length 1,4 m / 3' 3 ¾")
Art.-No.
240 990 400
Fence / Guide Extension for Pull-Push Saw ERIKA 60E with telescopic rod and drop stop
Art.-No.
240 990 600
Width:
650 mm
Guide for Milling Cutter Table ERIKA 60E 650 mm (25 ¼")
Art.-No.
240 984 002
Saw blade for fine cuts 120 x 1.2/1.8 x 20 mm,
(4 ¾ x 3/64“ / 5/64 x ¾“) 40 flat/trapezoidal teeth
Art.-No.
240 996 002
120 x 1,2/1,8 x 20 mm, 40 trapezoidal teeth (4 ¾ x 3/64 / 5/64 x ¾“)
Art.-No.
240 992 003
For universal use 190 x 1.2/2.0 x 30 mm (7½x 3/64-5/64 x 1³/₁₆“) Z36
Art.-No.
240 984 001
Saw blade for universal use 120 x 1.2/1.8 x 20 mm, 24 teeth (4 ¾“x3/64“ / 5/64“x ¾“ )
Art.-No.
240 984 003
Saw blade for long cuts 120 x 1.2/1.8 x 20 mm, 12 teeth (4 ¾ x 3/64“ / 5/64 x ¾“)